Model: LP06

• Nominal Voltage: 3.2V
• Capacity: 230Ah
• Energy Density: 180 Wh/kg
• Weight: 4.14 kg
• Voltage Operating Range: 2.5–3.65V
• Battery Type: Square lithium iron phosphate battery
• Operating Temperature Range: –30℃ to +60℃

BATTERY SPECIFICATION SHEET - MODEL LP06

1. Basic Parameters

1. Model Number: LP06
2. Battery Type: Square Lithium Iron Phosphate (LiFePO?) Battery
3. Chemical System: Lithium Iron Phosphate (LiFePO?)

2. Electrical Specifications

1. Nominal Voltage: 3.2V DC
2. Nominal Capacity: 230Ah (1C Discharge @ 25°C)
3. Energy Density: ≥180Wh/kg (Based on Battery Weight)
4. Voltage Operating Range:
   • Charge Cut-off Voltage: 3.65V DC
   • Discharge Cut-off Voltage: 2.5V DC
5. Charging Recommendations:
   • CC Charging Current: ≤1C (230A)
   • CV Charging Voltage: 3.65±0.05V
   • Charge Termination Current: ≤0.05C (11.5A)

3. Physical Characteristics

1. Dimensions: (To be Specified: L×W×H in mm)
2. Weight: 4.14kg (Per Cell)
3. Case Material: Aluminum Alloy (Subject to Confirmation)

4. Environmental Parameters

1. Operating Temperature Range:
   • Charging: 0°C~+55°C (Recommended ≤45°C)
   • Discharging: –30°C~+60°C
2. Storage Temperature Range:
   • Short-Term (≤3 months): –20°C~+60°C
   • Long-Term (>3 months): –10°C~+45°C
3. Humidity Range: 5%~95% RH (Non-Condensing)

5. Safety Features

1. Overcharge Protection: Built-in Multiple Protection Circuits (BMS Status to be Confirmed)
2. Overdischarge Protection: Automatic Cut-off at ≤2.5V
3. Short Circuit Protection: Response Time ≤10ms
4. Thermal Management: Recommended Thermal Conductive Pad (Specifications to be Added)

6. Cycle Life

• Standard Cycle: ≥2000 Cycles (1C Charge/Discharge, 80%DOD, 25°C)
• High-Temperature Cycle: ≥1500 Cycles (1C Charge/Discharge, 80%DOD, 45°C)

7. Application Fields

• Solar Energy Storage Systems
• Backup Power for Communication Base Stations
• Electric Tools
• Low-Speed Electric Vehicles

8. Precautions

1. Do Not Overcharge, Overdischarge, Short Circuit or Pierce the Battery.
2. Monitor Battery Temperature During Charging.
3. Dispose of Used Batteries According to Local Regulations.

Notes:

1. All specifications are typical values. Actual performance may vary slightly depending on test conditions.
2. For detailed technical documentation or custom services, please contact our factory.